iFan IF35-IF145 C Xtra Wall Mount Fan (14-57 inch)

The Fancom iFan Xtra Complete is an energy saving fan, especially developed for use in the agricultural sector.  The Xtra iFans are equipped with energy efficient EC motors and the latest technology, which produce less heat and lose less energy.  As well as an exceptionally low energy consumption, the iFan features excellent controllability, a low noise production level and extreme durability.  The shape of the module is fixed and its dimensions are very accurate, which results in an optimal tip wobble of the fan blades.  The iFan motor already
contains the control electronics and can be directly connected to the climate controller.

Features:

• The iFan Xtra Complete is delivered with a connection box enabling connection of a control and an alarm contact.  A power supply cable (L=2,5 m) and a signal cable (L=2,5 m) with 7-pole plug have standardly been pre-mounted to the fan.  There is no need to open a fan for installation.
• The iFan Xtra Complete can be controlled via I/O net or via an analog signal (0-10V / 10-0V).
• If the iFan Xtra Complete operates through I/O communication it can be overruled manually through the 0-10V input.  For this an optional manual override is available, part no. 35130145.
• – AUT : (0-1V) automatic regulation via the I/O network
• – OFF : (1-1,5V)
• – MAN : (1,5-10V) manual regulation (continuous) via manual control
• Manually overruling the controlled signal, I/O net or analog, can also be done by potentiometer.  For this an optional manual override is available part no. 35130162.
• – AUT : (12kW>) automatic regulation via the I/O network or analog control
• – OFF : (7.5KW-12kW)
• – MAN : (0-7.5KW) manual regulation (continuous) via potentiometer control
• When the (I/O) communication signal suddenly disappears, e.g. due to a failure, the fan will automatically continue in the last ventilation position with an alarm.  When using a temperature sensor, the ventilation will increase if temperature increases.
• When the fan during start-up (power supply off/on) does not detect a control signal (I/O or 0-10V), it will start running on 50% or 100%.  This value can be pre-set through a dip switch.
• The iFan Xtra Complete is provided with an alarm contact, which deactivates during motor malfunction or when the power supply of the motor is switched off.
• The iFan Xtra Complete is provided with an automatic protection against overloading and over-heating.  The power is automatically adjusted.  In the event of repeated or long-lasting problems the motor is switched off permanently.
• An external motor protection switch is not needed.  Fancom recommends mounting a working switch or wall socket nearby the fan for safety and service purpose.  Fancom advises always to keep the power on the fan, even when it is not in use.
• The iFan Xtra Complete is provided with a venting plug.  The venting plug allows air to escape freely from the motor while no water gets inside.

• Fan IF35 C Xtra Wall Mount, 14 inch, 50/60Hz, 1925 CFM@0Pa
• Fan IF40 C Xtra Wall Mount, 16 inch, 50/60Hz, 2808 CFM@0Pa
• Fan IF45 C Xtra Wall Mount, 18 inch, 50/60Hz, 3943 CFM@0Pa
• Fan IF50 C Xtra Wall Mount, 20 inch, 50/60Hz, 5068 CFM@0Pa
• Fan IF50P C Xtra Wall Mount Pressure, 20 inch, 50/60Hz, 5874 CFM@0Pa
• Fan IF56 C Xtra Wall Mount, 22 inch, 50/60Hz, 7251 CFM@0Pa
• Fan IF63 C Xtra Wall Mount, 25 inch, 50/60Hz, 9094 CFM@0Pa
• Fan IF80 C Xtra Wall Mount, 32 inch, 50/60Hz, 12047 CFM@0Pa
• Fan IF80P C Xtra Wall Mount Pressure, 32 inch, 50/60Hz, 16515 CFM@0Pa (400-460V)
• Fan IF92 C Xtra Wall Mount, 36 inch, 50/60Hz, 13547 CFM@0Pa
• Fan IF145 C Xtra Wall Mount, 57 inch, 50/60Hz, 39753 CFM@0Pa (400-460V)