Box Fan 130 cm (51 inch)

  • Fan 34130 Box 415V/60HZ, 4305115
  • Fan 14130 Box 240V/60HZ, 4305125
  • Fan 34130 Box Kit 415V/60HZ, 4305145

 

  • Check Mark Ask your local dealer for pricing and availability.
  • Check Mark Most products have a minimum 2-year manufacturers warranty.
  • Check Mark Direct shipments available, ask your dealer.

The 34130 and 14130 box fans are Fancom Greenline V-belt driven (130 cm / 51”) wall mounted fans.  Ideal for houses in which ventilation operates at high capacity and with low counter-pressure in warm periods, e.g. in houses with tunnel, cross or combi ventilation (MTT).  The impeller and a part of the casing is made of plastic making it more resistant to aggressive climates.  The housing is made of galvanized steel.  The fan is also available in a single-phase version (14130).  Both motors cannot be frequency-controlled and cannot be controlled with a step transformer or a triac.  Some fans are available in a ‘KIT’ version (unassembled to minimize transport costs).  It is important to ensure that the fan is not constantly damp (e.g. due to condensation).

Features:

  • Designed and selected materials provide minimal air losses.
  • Low noise level.
  • The blades are especially shaped providing a maximal air performance of the fan.
  • High air flow (46700 m³/h; 27487 cfm) with minimal effort (34.3 W / 1000m³/h; 17.2 cfm/W).
  • Main part of the fan is made of plastic and therefore resistant against aggressive climates.
  • Galvanized shutter.  The shutters are provided with gurneys, used in aerodynamics, to ensure the shutters open to the maximum.
  • Easy to clean for optimal hygiene.
  • CE-wire guard.
  • Due to the construction of the CE-wire guard an additional CE protection of the V-belt is not necessary.  Because of this no pollution occurs and retain the capacity.
  • Easy to maintain.
  • Weight reduction through the use of plastics.
  • Single phase motor provide with a thermo switch.

 

Get a Quote

Contact Us

Stay In The Loop

This field is for validation purposes and should be left unchanged.
Selection*