Aura 12 / Aura 14 Ventilation Controller
- Aura 12-A Ventilation Controller Analog with F-Net, 7010591
- Aura 12-T6 Ventilation Controller with 6 Amp Triac & F-Net, 7010592
- Aura 12-T10 Ventilation Controller with 10 Amp Triac & F-Net, 7010593
- Aura 14-A Ventilation Controller Analog with F-Net, 7010601
- Aura 14-T6 Ventilation Controller with 6 Amp Triac & F-Net, 7010602
- Aura 14-T10 Ventilation Controller with 10 Amp Triac & F-Net, 7010603
Optional:
- SF.7 Temperature Sensor for inside and outside temperatures, 5045011
- SW.7 Water Temperature Sensor for heating systems, 5045006
- Ask your local dealer for pricing and availability.
- Most products have a minimum 2-year manufacturers warranty.
- Direct shipments available, ask your dealer.
The Aura 12 / Aura 14 controller is used for ventilation / climate control in the agricultural sector. It regulates ventilation and heating for one section. The Aura 12/14 can be used with various ventilation systems:
• ProFlow (Aura 14 only)
• NatuFlow (Aura 14 only)
• EasyFlow
• CentralFlow
• Triac control with or without vortex damper (Txx versions)
• Analog control with or without vortex damper (A versions)
• Air inlet control
• Activating fans (combi-control)
Features:
• Control with or without vortex damper.
• Three models for controlling fans:
• Aura 12/14 – A For controlling ATM (CentralFlow) or iFans
• Aura 12/14 – T6 Triac 6 Amp
• Aura 12/14 – T10 Triac 10 Amp
• Three analogue outputs to control ventilation, air inlet, damper or heating.
• 4 relays can be used for ventilation (Aura 14). 3 relays can be used for ventilation (Aura 12).
• Ventilation with Combi table to set variable speed ventilation, on/off fans and air inlet. Maximum of 15 steps in the Combi.
• Heating control, on/off or mixing valve based on room temperature.
• Thermal control based on own temperature measurement or room temperature as:
• Extra heating control (on/off, mixing valve or voltage output 0-10V)
• Cooling control (on/off)
• Curve control (only Aura 14) for: heating setpoint, start temperature ventilation, bandwidth, minimum ventilation, maximum ventilation and thermal control setpoint.
• Temperature setting per 0,1°C.
• Ventilation setting in %.
• Outside temperature influence on ventilation control (bandwidth or start temperature ventilation).
• Room temperature measurement using 1 or 2 room sensors.
• Alarm contact.
Brochure
English
