Support for drive-unit VDL500/600 (2 pcs. required)
- Support for drive unit, 500 x 500 mm (2 needed for a drive unit), VDL-250440074
-
-
Suspension set for drive unit Flex 60/75/90/125 basic unit
Suspension set for drive unit Flex 60/75/90/125 basic unit
-
-
T-banjo coupling 1/8 inch -8/6mm blue VDL600
- T-banjo coupling 1/8 inch -8/6mm blue VDL600, VDL-142000043
-
T-piece double dia. 110mm 45 degrees (PE)
- T-piece double dia. 110mm 45 degrees (PE), VDL-170000093
-
-
-
-
-
-
Transport tube dia. 60×1.5mm L=5.8m galvanized
Transport tube dia. 60×1.5mm L=5.8m galvanized
-
Tube Bend 45 degree Flex 90 L=1.3m PVC
- Tube Bend 45 degree Flex 90 L=1.3m PVC, VDL-220240001
-
-
Tube with flare Flex 90 dia. 90mm, L=3095mm PVC
- Tube with flare Flex 90 dia. 90mm, L=3095mm PVC, VDL-220240002
-
Valve set 5/2, G 1/8 inch with 24 Vdc coil and plug
- Valve set 5/2, G 1/8 inch with 24 Vdc coil and plug, VDL-450520007
-
-
-
VDL600 end switch-off device set with sensor 230 VAC
- VDL600 end switch-off device set with sensor 230 VAC, VDL-250620070
-
VDL600 outlet as 250620068 but with red slide, when using Y-piece
- VDL600 outlet as 250620068 but with red slide, when using Y-piece, VDL-250620073
-
VDL600 pneumatic outlet incl. cylinder and T-banjo 8 mm, without magnetic switch
VDL600 pneumatic outlet incl. cylinder and T-banjo 8 mm, without magnetic switch0, VDL-250620009
-
Y-piece to connect two outlets to one dispenser
- Y-piece to connect two outlets to one dispenser, VDL-250940001
-
Y-piece with shuttle valve, stainless steel, pneumatic double acting cylinder (excl. piston set) incl. mounting material
- Y-piece with shuttle valve, stainless steel, pneumatic double acting cylinder (excl. piston set) incl. mounting material, VDL-220920024
