iFan IF35-IF92 M Xtra Module Fan (14-36 inch)

The Fancom iFan Xtra Modular is an energy saving fan, especially developed for use in the agricultural sector.  The Xtra iFans are equipped with energy efficient EC motors and the latest technology, which produce less heat and lose less energy.  As well as an exceptionally low energy consumption, the iFan features excellent controllability, a low noise production level and extreme durability.  The iFan M (modular) can be mounted under a Fancom chimney system.  The shape of the module is fixed and its dimensions are very accurate, which results in
an optimal tip wobble of the fan blades.  The iFan motor already contains the control electronics and can be directly connected to the climate controller.

Features:

• Fans in fixed chimney module with M-models.
• Including quick mounting system with coupling pins, enabling easy connection of the module to the Fancom chimney.
• The iFan Xtra Modular 63 and 80 types have integrated fastening points for mounting to the roof construction (M-version).
• The iFan Xtra Modular is delivered with a connection box enabling connection of a control and an alarm contact.  A power supply cable (L=2,5 m) and a signal cable (L=2,5 m) with 7-pole plug have standardly been pre-mounted to the fan.  There is no need to open a fan for installation.
• The iFan Xtra Modular can be controlled via I/O net or via an analog signal (0-10V;10-0V).
• If the iFan Xtra Modular operates through I/O communication it can be overruled manually through the 0-10V input.  For this an optional manual override is available, part no. 35130145.
  • AUT : (0-1V) automatic regulation via the I/O network
  • OFF : (1-1,5V)
  • MAN : (1,5-10V) manual regulation (continuous) via manual control
• Manually overruling the controlled signal, I/O net or analog, can also be done by potentiometer.  For this an optional manual override is available, part no. 35130162.
  • AUT : (12kW>) automatic regulation via the I/O network or analog control
  • OFF : (7.5KW-12kW)
  • MAN : (0-7.5KW) manual regulation (continuous) via potentiometer control
• When the (I/O) communication signal suddenly disappears, e.g. due to a failure, the fan will automatically continue in the last ventilation position with an alarm.  When using a temperature sensor, the ventilation will increase if the temperature increases.
• When the fan during start-up (power supply off/on) does not detect a control signal (I/O or 0-10V), it will start running on 50% or 100%. This value can be pre-set through a dip switch.
• The iFan Xtra Modular is provided with an alarm contact, which deactivates during motor malfunction or when the power supply of the motor is switched off.
• The iFan Xtra Modular is provided with an automatic protection against overloading and over-heating.  The power is automatically adjusted. In the event of repeated or long-lasting problems the motor is switched off permanently.
• An external motor protection switch is not needed.  Fancom recommends mounting a working switch or wall socket nearby the fan for safety and service purpose.  Fancom advises always to keep the power on the fan, even when it is not in use.
• The iFan Xtra Modular is provided with a venting plug.  The venting plug allows air to escape freely from the motor while no water gets inside.

• Fan IF35 M Xtra Module, 14 inch, 50/60Hz, 1925 CFM@0Pa
• Fan IF40 M Xtra Module, 16 inch, 50/60Hz, 2808 CFM@0Pa
• Fan IF45 M Xtra Module, 18 inch, 50/60Hz, 3943 CFM@0Pa
• Fan IF50 M Xtra Module, 20 inch, 50/60Hz, 5068 CFM@0Pa
• Fan IF50P M Xtra Module Pressure, 20 inch, 50/60Hz, 5874 CFM@0Pa
• Fan IF56 M Xtra Module, 22 inch, 50/60Hz, 7251 CFM@0Pa
• Fan IF63 M Xtra Module, 25 inch, 50/60Hz, 9094 CFM@0Pa
• Fan IF80 M Xtra Module, 32 inch, 50/60Hz, 12047 CFM@0Pa